500W Solar Package
500W Solar Package
Two panels, more watts, and room left for a fan.
Two 250W flush-mount monocrystalline panels bonded directly to the aluminum roof. No drilling, so the roof seal stays intact and there is nothing new to reseal every season. Both panels sit low enough that they do not add meaningful height or catch wind on the highway.
Splitting 500 watts across two smaller panels is the whole point. A single large panel eats the roof. Two smaller ones leave a clean 14 by 14 inch opening for a MaxxAir fan, so you are not choosing between power and ventilation. In good sun the pair puts down roughly 2000 to 2500 Wh a day, which is enough to run a fridge, charge devices, and keep a fan going overnight without touching the alternator.
OEM grade cells at 22 to 23 percent conversion, weatherproof and hail rated.
What we do
- Flush mount both panels to the aluminum roof with no drilling
- Route the leads into the camper through a junction box
What you do
- Pick up the leads inside the camper and run them into your own charge controller and battery
Specifications
| Panels | 2 × 250W, OEM grade |
| Total output | 500W |
| Working voltage | 18V per panel |
| Working current | 13.8A per panel |
| Open circuit voltage | 21.6V per panel |
| Short circuit current | 14.3A per panel |
| Cell type | Monocrystalline, 22 to 23% conversion |
| Mounting | Flush bonded, no drilling |
| Rating | Weatherproof, hail rated |
| Availability | Summit only |